Quick Guide to Cisco 2600 Router Platform
* Most commonly found model.
** This particular model has 3 WIC expansion slots
All
models have one console port, one auxiliary port, one Network Module
(NM) expansion slot and two WAN Interface Card (WIC) expansion slots.
All
models can perform 802.1Q trunking on their Ethernet and FastEthernet
interfaces; however, some models must be upgraded to maximum DRAM and
flash memory configurations.
Most models are 1RU in height; however, some models are 2RU.
Most
WIC and NM modules supported in the 2600 routing platform are also
supported by these other routing platforms; 1600, 1700 and 3600. What
this means is that NM's or WIC's you buy should be reusable in future
purchases.
The original Cisco intended marketing purpose of the 2600 series routing platform was to power branch offices.
For reference this is what a 2610 looks like;
For more information reference;
http://www.cisco.com/en/US/docs/routers ... 00ch1.html
pps = packets per second
- Code:
Model Throughput CPU? Memory Max DRAM Max Flash Ports
-----------------------------------------------------------------------------------
**2691 70 K pps SDRAM 256 MB 128 MB CF 2 FastEthernet
2651XM 40 K pps 80 MHz SDRAM 256 MB 48 MB 2 FastEthernet
2650XM 40 K pps 80 MHz SDRAM 256 MB 48 MB 1 FastEthernet
2621XM 30 K pps 50 MHz SDRAM 256 MB 48 MB 2 FastEthernet
2620XM 30 K pps 50 MHz SDRAM 256 MB 48 MB 1 FastEthernet
2611XM 20 K pps 40 MHz SDRAM 256 MB 48 MB 2 FastEthernet
2610XM 20 K pps 40 MHz SDRAM 256 MB 48 MB 1 FastEthernet
2651 37 K pps 80 MHz SDRAM 128 MB 32 MB 2 FastEthernet
2650 37 K pps 80 MHz SDRAM 128 MB 32 MB 1 FastEthernet
2621 25 K ppp 50 MHz EDO DRAM 64 MB 32 MB 2 FastEthernet
2620 25 K pps 50 MHz EDO DRAM 64 MB 32 MB 1 FastEthernet
2613 15 K pps ? 40 MHz EDO DRAM 64 MB 16 MB 0 Ethernet + 1 TokenRing
2612 15 K pps 40 MHz EDO DRAM 64 MB 16 MB 1 Ethernet + 1 TokenRing
2611 15 K pps 40 MHz EDO DRAM 64 MB 16 MB 2 Ethernet
*2610 15 K pps 40 MHz EDO DRAM 64 MB 16 MB 1 Ethernet
* Most commonly found model.
** This particular model has 3 WIC expansion slots
All
models have one console port, one auxiliary port, one Network Module
(NM) expansion slot and two WAN Interface Card (WIC) expansion slots.
All
models can perform 802.1Q trunking on their Ethernet and FastEthernet
interfaces; however, some models must be upgraded to maximum DRAM and
flash memory configurations.
Most models are 1RU in height; however, some models are 2RU.
Most
WIC and NM modules supported in the 2600 routing platform are also
supported by these other routing platforms; 1600, 1700 and 3600. What
this means is that NM's or WIC's you buy should be reusable in future
purchases.
The original Cisco intended marketing purpose of the 2600 series routing platform was to power branch offices.
For reference this is what a 2610 looks like;
For more information reference;
http://www.cisco.com/en/US/docs/routers ... 00ch1.html
pps = packets per second